Tripp Lite EN1111 Wireless Access Point Enclosure with Lock - Surface-Mount, ABS Construction, 11 x 11 in. EN1111

General Information for Tripp Lite Network Equipment Enclosures

Tripp Lite EN1111 Wireless Access Point Enclosure with Lock - Surface-Mount, ABS Construction, 11 x 11 in., Ceiling-mounted, Wall-mounted, Indoor, Acrylonitrile butadiene styrene (ABS), RoHS, 281.9 mm, 281.9 mm

EN1111 Wireless Access Point Enclosure with Lock - Surface-Mount, ABS Construction, 11 x 11 in.

Wall-Mount Enclosure Secures and Organizes Your Router/Modem or Wireless Access Point
Protect your indoor router/modem or Wi-Fi access point by installing it inside this SmartRack Wireless Access Point Enclosure made from impact-resistant UL 94-HB Classified ABS plastic. Its ideal for offices, dorms, hotels, classrooms, retail locations and other indoor areas where you need to keep Wi-Fi equipment secure, organized and out of the way.

Accommodates a Wide Range of Equipment, Including Cisco WAPs, up to 542 in.
Though the EN1111 is designed specifically to protect Cisco Wi-Fi access points, it will also house most other enclosures up to 542 cubic inches (891 cubic centimeters). While rugged enough to keep your equipment safe inside, its also transparent to wireless signals, ensuring strong Wi-Fi coverage. Convenient knockout ports allow easy cable routing through the enclosure and reduce cable clutter.

Locks Securely to Help Prevent Damage, Tampering or Theft
This Wi-Fi access point enclosure swings away from the wall or ceiling on a sturdy hinge, allowing easy access to equipment and cabling during installation and maintenance. It locks securely with the included keys to protect its contents against theft, tampering, dust and other contaminants. Vents on each end allow cool air to flow freely through the enclosure to prevent equipment from overheating.

Easy to Mount with the Included Hardware
The EN1111 comes fully assembled and ready for horizontal or vertical mounting on a wall or ceiling with the included installation hardware. It is designed for Cisco WAPs, but the included universal T-bar bracket will accommodate a wide variety of equipment from other brands. Pre-cut openings allow for precise positioning over wall outlets.

Typical Application
Protect a router/modem or wireless access point inside a classroom, office, hotel, store, dorm or other indoor space from damage, theft or tampering

Designed for Cisco WAPs, but accommodates equipment from most vendors
Rugged ABS plastic housing protects router/modem/WAP from theft or tampering
Transparent to wireless signals, ensuring an optimum Wi-Fi signal in all directions
Swings away from wall or ceiling on hinge to allow easy access to equipment and cabling
Comes fully assembled and ready for wall- or ceiling-mounting using included hardware

Wireless Access Point Enclosure with Lock, 11 x 11 in.
(2) M6 screws, 1 in.
(2) M6 trusshead screws, 0.25 in.
(4) M6 flathead screws, 0.25 in.
Cable tie
(4) Nylon spacers
T-bar bracket
(2) Keys
Installation guide EN1111 Wireless Access Point Enclosure with Lock - Surface-Mount, ABS Construction, 11 x 11 in.

Further details for this product, EN1111 Wireless Access Point Enclosure with Lock - Surface-Mount, ABS Construction, 11 x 11 in., can be found at the manufacturer website. Please note, these web addresse(s) are supplied by 3rd parties, Quzo UK is not responsible for the content.

Wireless Access Point Enclosure with Lock - Surface-Mount, ABS Construction, 11 x 11 in.

Tripp Lite EN1111 Wireless Access Point Enclosure with Lock - Surface-Mount, ABS Construction, 11 x 11 in.. Installation options: Ceiling-mounted, Wall-mounted, Suitable for: Indoor, Material: Acrylonitrile butadiene styrene (ABS). Width: 281.9 mm, Depth: 281.9 mm, Height: 111.8 mm. Products per master (outer) case: 10 pc(s), Master (outer) case width: 627 mm, Master (outer) case length: 727 mm

Warranty information: 5-year limited

Initial Release Date: 23/03/2019

Tripp Lite EN1111 Wireless Access Point Enclosure with Lock - Surface-Mount, ABS Construction, 11 x 11 in. EN1111 Specifications

Product Type Network Equipment Enclosures Brand Tripp Lite Collection Model Tripp Lite Wireless Access Point Enclosure with Lock - Surface-Mount, ABS Construction, 11 x 11 in. Collection Model Tripp Lite EN1111 Wireless Access Point Enclosure with Lock - Surface-Mount, ABS Construction, 11 x Manufacturer Product Type Tripp Lite Network Equipment Enclosures Suitable for Indoor Height 282 mm Width 282 mm Depth 281.9 mm Width 281.9 mm Depth 112 mm Weight 1.5 kg Height 111.8 mm Material Acrylonitrile butadiene styrene (ABS) Year 2019 Installation options Ceiling-mounted, Wall-mounted Country of origin China Certification RoHS Master (outer) case weight 20.7 kg Master (outer) case width 62.7 cm Master (outer) case length 72.7 cm Products per master (outer) case 10 pc(s) Master (outer) case gross weight 20.7 kg Master (outer) case GTIN (EAN/UPC) 10037332217810 Master (outer) case width 627 mm Master (outer) case length 727 mm Master (outer) case height 33.2 cm Master (outer) case height 332 mm Quantity per master (outer) case 10 pc(s) Package depth 307 mm Package width 301 mm Package height 139 mm Package weight 1.9 kg MPN EN1111

Tripp Lite EN1111 Wireless Access Point Enclosure with Lock - Surface-Mount, ABS Construction, 11 x 11 in. Downloads

Tripp Lite EN1111 Wireless Access Point Enclosure with Lock - Surface-Mount, ABS Construction, 11 x 11 in. Information Leaflet

Tripp Lite EN1111 Wireless Access Point Enclosure with Lock - Surface-Mount, ABS Construction, 11 x 11 in. EN1111 Reviews

There are no reviews for this product.