StarTech.com 2x M.2 NGFF SSD RAID Controller Card plus 2x SATA III Ports - PCIe PEXM2SAT3422

General Information for Startech Other Interface/Add-On Cards

StarTech.com 2x M.2 NGFF SSD RAID Controller Card plus 2x SATA III Ports - PCIe, PCIe, M.2, Full-height / Low-profile, PCIe 2.0, CE, FCC, Marvell - 88SE9230

2x M.2 NGFF SSD RAID Controller Card plus 2x SATA III Ports - PCIe

Add two Next Generation Form Factor M.2 SSDs and two SATA ports to your computer through PCI Express

This M.2 SSD RAID controller card lets you install two M.2 NGFF (Next Generation Form Factor) drives in your desktop computer. The card also features two SATA III (6Gbps) ports and supports hardware RAID. Now, you can merge the speed and compact size of M.2 solid state drives (SSD) with the storage capacity of traditional hard disk drives (HDD).

Leverage the size and speed of M.2 drives

This M.2 controller card lets you take advantage of the size and performance benefits of NGFF SSDs. M.2 drives are smaller than typical platter drives or mSATA-based SSDs, so you can install them in small form-factor PCs and servers, or in tighter areas within your computer case.

When you couple the card with an M.2 drive, you can give your computers performance a noticeable speed boost. By installing your operating system on the M.2 drive, you'll have faster access to the files you commonly use, and you can continue to use your higher-capacity platter HDD for bulk storage.

Peace of mind, with simple and cost-effective data recovery

Due to their performance and size advantages, M.2 drives are commonly used in laptops. If your laptop has failed but its M.2 drive is functional, then this card can help with data recovery. Once the M.2 drive is installed and the data recovery is complete, you can continue to use the drive for storage and backup purposes.

Build a high-performance RAID array

If you need a scalable, internal storage solution that you can count on, then this card can help. It supports a range of RAID configurations (RAID 0, 1, and 10), giving you multiple ways to expand your storage, improve your computers performance, or to create data redundancy backups.

Connect even more drives with port multiplication

Because the M.2 card supports port multiplication, you can connect up to four drives to one of the cards SATA ports. With a built-in port multiplier, you can install up to seven drives (two M.2 SSDs, five SATA drives) in your computer through this single drive controller.

Supports a wide range of drives

You can rest assured that your M.2 SATA drives are compatible with the card. It supports the most common drive sizes, including 22110, 2280, 2260, 2242 and 2230. For more versatility, the card also supports hybrid drives.

The PEXM2SAT3422 is backed by a StarTech.com 2-year warranty and free lifetime technical support.

The StarTech.com Advantage
2x M.2 NGFF SSD RAID Controller Card plus 2x SATA III Ports - PCIe

Further details for this product, 2x M.2 NGFF SSD RAID Controller Card plus 2x SATA III Ports - PCIe, can be found at the manufacturer website. Please note, these web addresse(s) are supplied by 3rd parties, Quzo UK is not responsible for the content.

StarTech.com 2x M.2 NGFF SSD RAID Controller Card plus 2x SATA III Ports - PCIe - Two Slot PCI Express M.2 RAID Card plus Two SATA Ports (PEXM2SAT3422)

StarTech.com 2x M.2 NGFF SSD RAID Controller Card plus 2x SATA III Ports - PCIe. Host interface: PCIe, Output interface: M.2, Expansion card form factor: Full-height / Low-profile. Certification: CE, FCC. Chipset: Marvell - 88SE9230, Data transfer rate (max): 6 Gbit/s, RAID levels: 0, 1, 10, JBOD. Windows operating systems supported: Windows 10 Education, Windows 10 Education x64, Windows 10 Enterprise, Windows 10 Enterprise x64,..., Mac operating systems supported: Mac OS X 10.10 Yosemite, Mac

Warranty information: 2 Years

Initial Release Date: 24/02/2016

StarTech.com 2x M.2 NGFF SSD RAID Controller Card plus 2x SATA III Ports - PCIe PEXM2SAT3422 Specifications

Product Type Other Interface/Add-On Cards Brand Startech Collection Model Startech 2x M.2 NGFF SSD RAID Controller Card plus 2x SATA III Ports - PCIe Manufacturer Product Type Startech Other Interface/Add-On Cards PCI Card form factor Full-height (low-profile) RAID levels 0,1,10,JBOD RAID levels 0, 1, 10, JBOD Output interface M.2 Expansion card form factor Full-height / Low-profile Expansion card standard PCIe 2.0 SATA revision 3.0 Internal SATA ports quantity 2 PCIe version 2.0 Linux operating systems supported Yes Server operating systems supported Windows Server 2008 R2,Windows Server 2012 Server operating systems supported Windows Server 2008 R2, Windows Server 2012 Depth 180 mm Width 20 mm Weight 68 g Height 120 mm Year 2016 Data transfer rate (max) 6 Gbit/s Harmonized System (HS) code 84733020 Operating temperature (T-T) 5 - 50 C Operating relative humidity (H-H) 20 - 80% Storage temperature (T-T) -25 - 70 C Operating relative humidity (H-H) 20 - 80 Storage temperature (T-T) -25 - 70 Certification CE, FCC Master (outer) case length 500 mm Master (outer) case height 357 mm Products per master (outer) case 40 pc(s) Master (outer) case width 465 mm Host interface PCIe Sustainability certificates RoHS Compliance certificates RoHS Package depth 162 mm Package height 47 mm Package depth 216 mm Package width 155 mm Package width 219 mm Package height 45 mm Package weight 174 g Package weight 169 g Quick installation guide Yes Chipset Marvell - 88SE9230 Port multiplier Yes MPN PEXM2SAT3422

StarTech.com 2x M.2 NGFF SSD RAID Controller Card plus 2x SATA III Ports - PCIe PEXM2SAT3422 Reviews

There are no reviews for this product.