Bose PowerMatch PM8500N 8.0 channels Performance/stage Black 343546-4110

General Information for BOSE Amplifiers

Bose PowerMatch PM8500N, 8.0 channels, 500 W, D, 0.4%, 102 dB, 1000 W

PowerMatch PM8500N

PowerMatch PM8500N Configurable Amplifier

The Bose? PowerMatch PM8500N configurable professional power amplifier provides concert-quality sound with a high level of scalability and configurability for fixed installation sound reinforcement systems. Ethernet-based networking enables configuration control and monitoring and an expansion slot supports input from optional digital audio accessory cards. PowerMatch amplifiers utilize numerous Bose technologies to deliver an unprecedented combination of performance efficiency and ease of installation—all in a reliable proprietary design.

• QuadBridge™ Technology – Allows each 4-channel loudspeaker block to be configured as Mono V-Bridge I-Share or Quad modes allowing the total available power of the amplifier block to be allocated to one or more output channels. The amplifier is capable of driving both low impedance and 70/100V loudspeaker loads directly.
• Bose? ControlSpace? Designer™ software – PowerMatch amplifiers can be fully configured using ControlSpace Designer software via the front panel USB connection or the rear panel Ethernet connection. Using ControlSpace Designer software you can access additional features including: Parametric EQ stages load sweep of each output channel and auto standby. ControlSpace Designer software is also used to integrate network model PowerMatch amplifiers into larger control and monitoring systems comprised of Bose ESP processors and CC control centers.
Auto-Standby/Auto-Wake function – When enabled this function automatically enters/exits Standby Mode allowing the system to consume less power.
• Dual voltage and current feedback loop – Proprietary design combines Class-D efficiency with a unique current and voltage feedback loop circuit that continuously monitors and controls both the current and voltage delivered to the loudspeaker load. Independent of power level and load impedance the amplifier consistently delivers the widest possible dynamic range frequency response and lowest possible distortion.
• PeakBank™ power supply – Regenerative 4-quadrant power supply enables higher power density while allowing the re-use of energy from reactive loads that is normally wasted in conventional Class-D designs. This highly efficient amplifier design delivers sustainable and repeatable low frequency response.
• Fast-tracking power factor correction (PFC) – Efficiently manages the current drawn from the AC mains allowing the amplifier to drive loudspeakers to maximum output longer without power fluctuation. PFC provides superior transient response and functions at peak burst power much longer than conventional Class-D amplifier designs to satisfy the requirements of even the most demanding program material.

Features
Type	Amplifier

PowerMatch PM8500N

Further details for this product, PowerMatch PM8500N, can be found at the manufacturer website. Please note, these web addresse(s) are supplied by 3rd parties, Quzo UK is not responsible for the content.

4000 W (500 W x 8 channels at 4 ohms), 71 / 142 V, 20 Hz - 20 kHz, SNR 102 dB, 3-pin Phoenix Contact

Bose PowerMatch PM8500N. Audio output channels: 8.0 channels, Peak power per channel: 500 W, Amplifier class: D. Speakers connectivity type: Euroblock, USB port type: USB Type-B, Ethernet LAN data rates: 100 Mbit/s. AC input voltage: 100 - 240 V, AC input frequency: 50 - 60 Hz, Power protection features: DC offset, Over current, Over voltage, Overheating, Short circuit. Width: 483 mm, Depth: 525 mm, Height: 88 mm. LED indicators: Fault, Signal strength

Initial Release Date: 29/08/2020

Bose PowerMatch PM8500N 8.0 channels Performance/stage Black 343546-4110 Specifications

Product Type Amplifiers Brand BOSE Collection Model BOSE PowerMatch PM8500N Manufacturer Product Type BOSE Amplifiers Product colour Black Cooling type Active Built-in display Yes LED indicators Fault, Signal strength Product Family PowerMatch PM8500N Audio quality 24 bit Peak power per channel 500 W Total Harmonic Distortion (THD) 0.4% Bridge-mode power output per channel (4 Ohm) 1000 W Bridge-mode power output per channel (8 Ohm) 1000 W Input impedance 100000 Frequency Range 20 - 20000 Hz RMS rated power 3000 W Ethernet LAN data rates 100 Mbit/s Purpose Performance/stage USB 2.0 ports quantity 1 Ethernet LAN (RJ-45) ports 1 Speakers connectivity type Euroblock AC Input Voltage 100 - 240 V AC input frequency 50 - 60 Hz Maximum current 15 A AC input frequency 50/60 Hz Depth 525 mm Width 483 mm Weight 12.9 kg Height 88 mm Signal-to-Noise Ratio (SNR) 102 dB Channels quantity 8 channels Amplifier class D Audio output channels 8.0 channels Year 2020 USB port type USB Type-B Rack capacity 2U Multi-Zone capability Yes Efficiency 75% Power protection features DC offset, Over current, Over voltage, Overheating, Short circuit Operating temperature (T-T) 0 - 40 C Damping factor 1000 Bridge function Yes Package weight 15.7 kg Connection to PC Yes MPN 343546-4110

Bose PowerMatch PM8500N 8.0 channels Performance/stage Black Downloads

Bose PowerMatch PM8500N 8.0 channels Performance/stage Black Instruction Manual

Bose PowerMatch PM8500N 8.0 channels Performance/stage Black Information Leaflet

Bose PowerMatch PM8500N 8.0 channels Performance/stage Black 343546-4110 Reviews

There are no reviews for this product.