Cisco Meraki MR28 1.5 Mbit/s White Power over Ethernet (PoE) MR28-HW

General Information for Cisco Wireless Access Points

Cisco Meraki MR28, 2.4 GHz, 5 GHz, 1.5 Mbit/s, AES, EAP-SIM, EAP-TLS, EAP-TTLS, TKIP, WEP, WPA, WPA2-Enterprise, WPA2-PSK, WPA3, WPA3-Enterprise, 10,1000 Mbit/s

MR28

Dualradio aggregate frame rate of up to 1.5 Gbps
5 GHz 2x2:2 radio and 2.4 GHz 2x2:2 radio offer a combined dualradio aggregate frame rate of 1.5 Gbps*, with up to 1,201 Mbps in the 5 GHz band and 286 Mbps in the 2.4 GHz band. Technologies like transmit beamforming and enhanced receive sensitivity allow the MR28 to support a higher client density than typical enterprise-class access points, resulting in better performance for more clients, from each AP.

Multi-User Multiple Input Multiple Output (MU-MIMO)
With support for features of 802.11ax, the MR28 offers MU-MIMO and UL/DL OFDMA for more efficient transmission to multiple clients. Especially suited to environments with numerous mobile devices, MU-MIMO enables multiple clients to receive data simultaneously. This increases the total network performance and improves the end-user experience.

Automatic cloud-based RF optimization
The MR28s sophisticated and automated RF optimization means that there is no need for the dedicated hardware and RF expertise typically required to tune a wireless network. Collected RF data is continuously fed back to the Meraki cloud. This data is then used to automatically tune the channel selection, transmit power, and client connection settings for optimal performance under even the most challenging RF conditions.

Integrated enterprise security and guest access
The MR28 features integrated, easy-to-use security technologies to provide secure connectivity for employees and guests alike. Advanced security features such as AES hardware-based encryption and Enterprise authentication with 802.1X and Active Directory integration provide wired-like security while still being easy to configure. One-click guest isolation provides secure, Internet-only access for visitors. PCI compliance reports check network settings against PCI requirements to simplify secure retail deployments.

Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration
Meraki Systems Manager natively integrates with the MR28 to offer automatic, context-aware security. Systems Managers self-service enrollment helps to rapidly deploy MDM without installing additional equipment, and then dynamically tie firewall and traffic shaping policies to client posture.

Application-aware traffic shaping
The MR28 includes an integrated layer 7 packet inspection, classification, and control engine, enabling the configuration of QoS policies based on traffic type, helping to prioritize mission-critical applications while setting limits on recreational traffic like peer-to-peer and video streaming. Policies can be implemented per network, per SSID, per user group, or per individual user for maximum flexibility and control.

Voice and video optimizations
Industry standard QoS features are built-in and easy to configure. Wireless MultiMedia (WMM) access categories, 802.1p, and DSCP standards all ensure important applications get prioritized correctly, not only on the MR28 but on other devices in the network. Unscheduled Automatic Power Save Delivery (U-APSD) and new Target Wait Time features in 802.11ax clients ensure minimal battery drain on wireless VoIP phones.

Self-configuring, self-maintaining, always up-to-date
When plugged in, the MR28 automatically connects to the Meraki cloud, downloads its configuration, and joins the appropriate network. If new firmware is required, this is retrieved by the AP and updated automatically. This ensures the network is kept up-to-date with bug fixes, security updates, and new features.

Advanced analytics
Drilling down into the details of network usage provides highly granular traffic analytics. Visibility into the physical world can be enhanced with journey tracking through location analytics. Visitor numbers, dwell time, repeat visit rates, and track trends can all be easily monitored in the dashboard and deeper analysis is enabled with raw data available via simple APIs.

Bluetooth Low Energy Beacon and scanning radio
An integrated Bluetooth radio provides seamless deployment of BLE Beacon functionality and effortless visibility of Bluetooth devices. MR28

Further details for this product, MR28, can be found at the manufacturer website. Please note, these web addresse(s) are supplied by 3rd parties, Quzo UK is not responsible for the content.

1.5 Gbps, 2.4 GHz, 5 GHz, Bluetooth, 2 x 2:2 MU-MIMO 802.11ax, Ethernet, PoE, 202 x 124 x 25.8 mm, 272 g

Cisco Meraki MR28. 2.4 GHz, 5 GHz, Maximum data transfer rate: 1.5 Mbit/s. Security algorithms: AES, EAP-SIM, EAP-TLS, EAP-TTLS, TKIP, WEP, WPA, WPA2-Enterprise, WPA2-PSK, WPA3, WPA3-Enterprise. Ethernet LAN data rates: 10,1000 Mbit/s. Power over Ethernet (PoE). Product colour: White

Initial Release Date: 16/09/2022

Cisco Meraki MR28 1.5 Mbit/s White Power over Ethernet (PoE) MR28-HW Specifications

Product Type Wireless Access Points Brand Cisco Collection Model Cisco MR28 Manufacturer Product Type Cisco Wireless Access Points Product colour White LED indicators Power, Yes Product Family MR28 Maximum data transfer rate 1.5 Mbit/s MIMO type Multi User MIMO Security algorithms AES, EAP-SIM, EAP-TLS, EAP-TTLS, TKIP, WEP, WPA, WPA2-Enterprise, WPA2-PSK, WPA3, WPA3-Enterprise Antenna Type Internal Virtual LAN features Tagged VLAN Bluetooth Yes Bluetooth Version 5.0 Ethernet LAN data rates 10,1000 Mbit/s MIMO Yes VLAN support Yes Ethernet LAN (RJ-45) ports 1 Bluetooth Low Energy (BLE) Yes DC-in jack Yes AC Input Voltage 37 - 57 V Power consumption (typical) 15 W DC voltage range 12 V Width 124 mm Depth 25.8 mm Height 202 mm Weight 272 g BeamForming Yes Year 2022 Quality of Service (QoS) support Yes Firmware upgradeable Yes 2.4 GHz Yes 5 GHz Yes 6 GHz No Spread spectrum method OFDMA Wi-Fi Multimedia(WMM)/(WME) Yes Wi-Fi Multimedia (WMM)/(WME) Yes Wi-Fi Roaming Yes Fast roaming Yes Wireless isolation Yes Maximal-Ratio Combining (MRC) Yes Operating temperature (T-T) 0 - 40 C Operating altitude 0 - 12192 m Operating relative humidity (H-H) 5 - 95% Antenna gain level (max) 6 dBi Sustainability certificates RoHS Compliance certificates RoHS Power over Ethernet (PoE) Yes AC adapter included Yes MPN MR28-HW

Cisco Meraki MR28 1.5 Mbit/s White Power over Ethernet (PoE) Downloads

Cisco Meraki MR28 1.5 Mbit/s White Power over Ethernet (PoE) Information Leaflet

Cisco Meraki MR28 1.5 Mbit/s White Power over Ethernet (PoE) Instruction Manual

Cisco Meraki MR28 1.5 Mbit/s White Power over Ethernet (PoE) MR28-HW Reviews

There are no reviews for this product.