Cooler Master HAF The Berserker Full Tower Grey, Titanium H700-IGNN-S00

General Information for Cooler Master PC Cases

Cooler Master HAF The Berserker, Full Tower, PC, Grey, Titanium, ATX, EATX, micro ATX, Mini-ITX, SSI CEB, SSI EEB, Plastic, Steel, Tempered glass, Multi

The Berserker

Raw Power Unleashed
HAF 700 is a case built to brute force and shatter the ceiling of component potential, maximize results and provide the smoothest system operation experience possible.

Establishing new grounds in thermal efficiency, this stealthy powerhouse elevates the function and impact of any components installed without fail. From a premium build experience, to robust quality, and performance you can rely on, each detail of HAF 700 has been fine-tuned to satisfy the needs of every power user.

The HAF 700 truly has no limits when it comes to hardware support.
Drawing inspiration from our ever-growing community of enthusiasts, the HAF 700 is capable of housing up to EATX motherboards, as well as any sized graphics cards in both horizontal and vertical orientations.

Users can enjoy direct side intake and support for power supplies of up to 200mm, and well as unparalleled number of options for installing disks, pumps and radiators.

HARDWARE SUPPORT: NO LIMITS
The HAF 700 truly has no limits when it comes to hardware support.
Drawing inspiration from our ever-growing community of enthusiasts, the HAF 700 is capable of housing up to EATX motherboards, as well as any sized graphics cards in both horizontal and vertical orientations.

Users can enjoy direct side intake and support for power supplies of up to 200mm, and well as
unparalleled number of options for installing disks, pumps and radiators.

Mammoth Radiator Support
HAF 700 provides users unparalleled options for out-of-the-box cooling support. Users may pick and choose between installing a selection of radiator sizes in various mounting locations: 480mm (side panel), 360mm (front panel, bottom panel, or up to dual radiators on the top panel), or 240mm (rear panel).

EXTREME HEAT DISSIPATION
200mm SickleFlow ARGB PWM Performance Edition
HAF 700 comes with dual 200mm Sickleflow PWM fans tailored to maximize the performance potential of installed components. Fan curves can be customized to keep temperatures and noise levels low, even in extreme overclocking scenarios.

Integrated 7x PWM & 5x ARGB Hub
This chassis features a fully integrated PWM/ARGB Hub that allows for effortless cable management and control over multiple fans and ARGB devices. The Hub is fully compatible with ARGB Gen2 devices, allowing users to customize fan speeds and ARGB effects in depth according to their system needs or personal preference.

Unrestricted Front Panel Intake
HAF 700 sports a fully meshed front panel, specifically designed to allow for maximum air intake. With the front panel structurally reinforced to prevent resonation caused by fan vibrations, systems can run smoothly at minimal noise levels.

EXTENSIVE TOOL-LESS DESIGN
Tool-less Vertical GPU Mounting (Patent Pending)
The back panel implements a patent pending clamping mechanism that allows users to install,
remove, and upgrade graphics cards without the need to use any tools.
This custom design locks the GPU firmly in place in case of transportation. Safety pins prevent the GPU from falling and being damaged when the clamp is opened.

Tool-less PSU Mount
HAF 700 implements a never-seen-before way of securing the power supply without the need to
fiddle with tools. To install, simply slide the power supply in place and secure it with the two included thumbscrews on the rear end of the case.

Tool-less HDD Cage
The rear chambers includes a tool-less, swiveling drive cage that allows users to quickly access, maintain and swap hard drives with ease.

Tool-less Multifunction Bracket (HDDs / SSDs / Pumps / Reservoirs)
HAF 700 features versatile brackets that can be used to mount an SSD, HDD, or a pump/reservoir for liquid cooling.

Brackets can be placed in multiple positions inside the case, including the cooling brackets and the open side of the motherboard tray.

INTUITIVE CHASSIS DESIGN
Tool-less Removable Top Panel
Exclusive tool-less removable top panel design allows for easy removal of top and side panels. Cooling components such as fans and radiators can be effortlessly installed, accessed and maintained.

Rotatable Radiator Bracket
HAF 700 boasts a fully modular, rotatable fan/radiator bracket which can be installed in multiple positions for complex setups. Users may rotate the bracket to showcase their radiator at unique
angles.

INTUITIVE CHASSIS DESIGN
Rich Connectivity
The front I/O is designed to maximize the front connectivity for most high end motherboards,
featuring four USB Gen 3.1 Type A ports, a USB Gen 3.2 Type C, a 4 pin audio/mic headset jack as
well as a dedicated mic jack.

Multi Chamber Layout
The body of HAF 700 is organized into multiple sectors, allowing for complex yet tidy builds: a cooling chamber, cable management gutter, swiveling hard drive cage, as well as a power supply slot. Furthermore, by segregating non heat sensitive components, heat dissipation can be optimized and targeted towards heat sensitive components at an overall higher efficiency.

ULTIMATE CUSTOMIZATION FREEDOM
ARGB Gen2 Ready, Controller Included
ARGB Gen2 devices allow software to automatically detect the arrangement and number of LEDs in each ARGB device. Thus, ARGB Gen 2 devices make full range customization possible as each LED can be independently controlled.

Each device will be independently recognized, regardless of the number of devices connected to a single ARGB port, allowing users to create complex lighting setups with minimal wiring and configuration.

Unlike some ARGB Gen1 devices which sacrifice hardware compatibility for customization flexibility, Cooler Masters ARGB Gen2 devices remain fully compatible with third party devices, granting users the freedom to mix and match multiple devices from different ecosystems.

MasterPlus+ Implementation
HAF 700 comes equipped with a software suite in MasterPlus+, facilitating user-friendly management and customization of the integrated ARGB Gen2 controller (A1).

The A1 controller plugin will automatically be activated on MasterPlus+ once the controller has been connected to the system.
The Berserker

Further details for this product, The Berserker, can be found at the manufacturer website. Please note, these web addresse(s) are supplied by 3rd parties, Quzo UK is not responsible for the content.

Mini ITX/Micro ATX/ATX/E-ATX/SSI CEB/SSI EEB, 2.5"/3.5", 1x USB 3.2 Gen 2 Type C, 4x USB 3.2 Gen 1, 3.5mm, 2x SickleFlow 200 ARGB PWM, 2x SickleFlow 120 ARGB PWM, 1x SickleFlow 120 ARGB PWM, 666 x 291 x 626 mm, 19.6 kg

Cooler Master HAF The Berserker. Form factor: Full Tower, Type: PC, Product colour: Grey, Titanium. Power supply location: Bottom, Supported power supply form factors: ATX. Front fans installed: 2x 200 mm, Front fans diameters supported: 200 mm, Side fans diameters supported: 120,140 mm. Supported HDD sizes: 2.5,3.5". Width: 291 mm, Depth: 666 mm, Height: 626 mm

Warranty information: 2 Years

Initial Release Date: 04/07/2022

Cooler Master HAF The Berserker Full Tower Grey, Titanium H700-IGNN-S00 Specifications

Product Type PC Cases Brand Cooler Master Collection Model Cooler Master The Berserker Manufacturer Product Type Cooler Master PC Cases Form Factor Full Tower Supported motherboard form factors ATX, EATX, micro ATX, Mini-ITX, SSI CEB, SSI EEB Number of 3.5" bays 9 Number of 5.25" bays 0 Product colour Grey, Titanium Cable management Yes Number of 2.5" bays 9 Number of expansion slots 8 Side window Yes Illumination colour Multi Illumination location Case fans Product colour Grey Illumination Yes Anti-dust filter Yes Maximum CPU cooler height 16.6 cm Maximum graphics card length 49 cm Maximum PSU length 20 cm Product colour Multicoloured Product Family The Berserker Supported HDD sizes 2.5,3.5" HDD/SSD combo cage Yes Audio Input Yes Audio Output Yes USB 3.2 Gen 2 (3.1 Gen 2) Type-A ports quantity 0 USB 3.2 Gen 2 (3.1 Gen 2) Type-C ports quantity 1 USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity 4 USB 2.0 ports quantity 0 ARGB ports quantity 5 Power supply included No Power supply location Bottom Front fans installed 2x 200 mm Number of front fans supported (max) 2 Front fans diameters supported 200 mm Number of side fans supported (max) 4 Side fans diameters supported 120,140 mm Rear fans installed 2x 120 mm Number of rear fans supported (max) 2 Rear fans diameters supported 120 mm Number of top fans supported (max) 6 Top fans diameters supported 120,140,200 mm Top fans diameters supported 420,120,140,200 mm Bottom fans installed 1x 120 mm Number of bottom fans supported (max) 3 Bottom fans diameters supported 120,140 mm Side radiator fan sizes supported 360,420,480 mm Side radiator sizes supported 360,420,480 mm Rear radiator fan sizes supported 240 mm Rear radiator sizes supported 240 mm Top radiator fan sizes supported 360,420 mm Top radiator sizes supported 360,420 mm Bottom radiator fan sizes supported 360,420 mm Bottom radiator sizes supported 360,420 mm Type PC Height 540 mm Depth 556 mm Height 626 mm Width 291 mm Weight 19.6 kg Width 279 mm Depth 666 mm Material Plastic, Steel, Tempered glass Year 2022 Case Type Full Tower Case Supported power supply form factors ATX Features RGB Lighting Package width 399 mm Package depth 780 mm Package height 725 mm Package weight 23.6 kg LED controller Yes Accessories included 1x Rotatable Radiator Bracket Accessories included 1 x ARGB/PWM Hub Radiator bracket included Yes MPN H700-IGNN-S00

Cooler Master HAF The Berserker Full Tower Grey, Titanium Downloads

Cooler Master HAF The Berserker Full Tower Grey, Titanium Instruction Manual

Cooler Master HAF The Berserker Full Tower Grey, Titanium Information Leaflet

Cooler Master HAF The Berserker Full Tower Grey, Titanium H700-IGNN-S00 Reviews

There are no reviews for this product.