General Information for Tripp Lite Poe Adapters
Tripp Lite NPOE-30W-1G-INT Gigabit PoE+ Midspan Active Injector - IEEE 802.3at/802.3af, 30W, 1 Port, International Power Cords, Gigabit Ethernet, 10,100,1000 Mbit/s, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, Cat5, Cat5e, Cat6
NPOE-30W-1G-INT Gigabit PoE+ Midspan Active Injector - IEEE 802.3at/802.3af, 30W, 1 Port, International Power Cords
Adds a PoE Device to Your LAN Without Adding a PoE SwitchNow you can add a surveillance camera, wireless access point, VoIP phone or other PoE (Power over Ethernet) device to your home or office network, even if your network switch doesnt support PoE. Instead of making an expensive upgrade to a PoE switch, you can use this single-port PoE+ injector to send 30 watts of power, as well as Gigabit Ethernet data, through your existing Cat5e/6/6a cabling.
Saves You Time and Money on Unnecessary Equipment UpdatesThis compact PoE+ injector delivers 10/100/1000 Mbps of data and up to 30 watts of power using existing Cat5e/6/6a cables. That means, in addition to not buying a new PoE network switch, you also dont need to install new AC power lines and electrical outlets. This cost-effective midspan injector sends DC power and Ethernet data through your Ethernet cable, cutting down
on cable clutter, equipment costs and installation time and labor.
Expands Your PoE Network Up to 100 Meters
The NPOE-30W-1G-INT delivers both power and data to any IEEE 802.3at (PoE+) or IEEE 802.3af (PoE) device up to 100 meters (328 feet) away. This allows you to install a device in a building lobby, on a ceiling, inside a warehouse or anywhere else an AC power outlet is unavailable. The PoE+ injector supports full-duplex 2 Gbps communication for sending and receiving data simultaneously. It also protects your device against short circuits, high voltage and overloads.
Simple Plug-and-Play Installation Has Your Device Connected in Minutes
No configuration or software is required to add the NPOE-30W-1G-INT to your LAN. Just connect your switch or network jack to the shielded RJ45 LAN port and your PoE device to the shielded RJ45 POE port using existing Cat5e/6/6a cable. Connect the unit to an outlet using the included power supply with the included UK or European power cords. LEDs indicate the unit is receiving power and is ready to transmit data.
Designed for Installation Almost Anywhere
Mounting holes are featured for installing the midspan injector on a shelf, desktop, wall or any other smooth surface with user-supplied hardware. The black plastic housing fits in the palm of your hand, so it is small enough to hide away without interfering with your workflow or dcor. The fanless design is ideal for silent operation. NPOE-30W-1G-INT Gigabit PoE+ Midspan Active Injector - IEEE 802.3at/802.3af, 30W, 1 Port, International Power Cords
Further details for this product, NPOE-30W-1G-INT Gigabit PoE+ Midspan Active Injector - IEEE 802.3at/802.3af, 30W, 1 Port, International Power Cords, can be found at the manufacturer website. Please note, these web addresse(s) are supplied by 3rd parties, Quzo UK is not responsible for the content.
Gigabit PoE+ Midspan Active Injector - IEEE 802.3at/802.3af, 30W, 1 Port, International Power Cords
Tripp Lite NPOE-30W-1G-INT Gigabit PoE+ Midspan Active Injector - IEEE 802.3at/802.3af, 30W, 1 Port, International Power Cords. Ethernet interface type: Gigabit Ethernet, Ethernet LAN data rates: 10,100,1000 Mbit/s, Networking standards: IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u. Product colour: Black. Power over Ethernet (PoE) voltage: 30 V, AC adapter input voltage: 100 - 240 V, AC adapter frequency: 50/60 Hz. Compliance certificates: CE, Federal Communications Commissi
Warranty information: 3-year limited
Initial Release Date: 04/05/2022
Read more »
Tripp Lite NPOE-30W-1G-INT Gigabit PoE+ Midspan Active Injector - IEEE 802.3at/802.3af, 30W, 1 Port, International Power Cords NPOE-30W-1G-INT Specifications
Product Type
Poe Adapters
Collection Model Tripp Lite NPOE-30W-1G-INT Gigabit PoE+ Midspan Active Injector - IEEE 802.3at/802.3af, 30W, 1 Port
Manufacturer Product Type
Tripp Lite Poe Adapters
Product colour
Black
LED indicators Yes
Ethernet interface type Gigabit Ethernet
Ethernet LAN data rates 10,100,1000 Mbit/s
Cable types supported Cat5, Cat5e, Cat6, Cat6a
Networking standards IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u
Ethernet LAN (RJ-45) ports 2
Power over Ethernet (PoE) voltage 30 V
Input current 0.75 A
AC adapter frequency 50/60 Hz
AC adapter input voltage 100 - 240 V
AC adapter output voltage 53 V
Power consumption (typical) 30 W
Weight 250 g
Year 2022
Country of origin China
Harmonized System (HS) code 8504.40.9550
Storage relative humidity (H-H) 10 - 90%
Operating temperature (T-T) 0 - 50 C
Operating relative humidity (H-H) 10 - 90%
Operating temperature (T-T) 32 - 122 F
Storage temperature (T-T) -20 - 80 C
Products per master (outer) case 30 pc(s)
Master (outer) case width 368.3 mm
Master (outer) case length 480.1 mm
Master (outer) case GTIN (EAN/UPC) 10037332272017
Master (outer) case gross weight 16.2 kg
Master (outer) case height 294.6 mm
Sustainability certificates CE, Federal Communications Commission (FCC), REACH, RoHS, WEEE
Sustainability compliance Yes
Compliance certificates CE, Federal Communications Commission (FCC), REACH, RoHS, WEEE
Power over Ethernet (PoE) Yes
Manual Yes
Package depth 177.8 mm
Package width 94 mm
Package height 88.9 mm
Package weight 540 g
Package Type Box
Power cord included Yes
AC adapter included Yes
Number of products included 1 pc(s)
MPN NPOE-30W-1G-INT
Tripp Lite NPOE-30W-1G-INT Gigabit PoE+ Midspan Active Injector - IEEE 802.3at/802.3af, 30W, 1 Port, International Power Cords NPOE-30W-1G-INT Reviews
There are no reviews for this product.