CiT CSCITMIRAGE computer case Midi Tower Black CSCITMIRAGE

General Information for Cit PC Cases

CiT CSCITMIRAGE, Midi Tower, PC, Black, ATX, micro ATX, Mini-ITX, SPCC, Tempered glass, Gaming

CSCITMIRAGE

Improve your gaming aesthetic with the CiT Mirage Glass ARGB PC Case. Featuring six ARGB Dual-Ring Infinity fans as well as providing ample support for all your high-end hardware.

Take your setup to new heights with this ATX gaming chassis with a stylish and elegant dual tempered glass panelling this case looks a spectacle. Surrounded from every angle with stylish and sleek fans, customisable RGB lighting and effortless cable management. Within the interior of the Mirage includes cable routing holes on the Motherboard backplate that makes managing your cables nice and easy and keeps your PC looking clean.

Install another two fans to fully populate the Mirage and make it eight fans and with up to two water cooling locations, this case is full of cooling capability.

Stand out with the touch of Infinity, the circular-shaped infinity mirrors at the centre of the fans create a mesmerising LED lighting display with their multi-layer effect. They not only look fantastic but also ensure all components are taken care of for when it comes to keeping temperatures balanced & conditions optimised for a peak performance.

Moving onto the top of the case the I/O panel provides varied connectivity support with USB3.0 and USB2.0 connections and inside the Mirage we have included a 6-port ARGB fan hub with controls for your LED lighting and have access to approximately 26 LED modes or have access to 16.8 million colours using a compatible addressable RGB Motherboard.

This completely black interior has smart build potential with a spacious interior offering wide support for a range of gaming hardware to build a powerful effective gaming PC. It can fit a graphics card up to 30 centimetres in length, CPU Cooler up to 16.5 centimetres in height and can hold 3 x 2,5" and 2 x 3,5" drives. An ATX power supply unit measuring up to 195mm will fit inside.

Build a colourful gaming chassis with ease and create your dream gaming PC using the Mirage.

Stylish Mirage - The CiT Mirage is built using a combination of premium materials, the chassis is 0.6mm SPCC steel and the front and left-hand side panelling is made with stylish tempered glass and the side panel has a 30% tint to showcase your ARGB fans and key components. The tempered glass is surrounded by black interior for that classic look.

High-End Cooling - There are six pre-installed Dual-Ring Infinity fans on the CiT Mirage. There are three 120mm fans mounted onto the front panel, whilst there are two 120mm fans are mounted on the top and a single fan on the rear panel. These fans can be controlled one of two ways either via the integrated LED button on the I/O panel or by connecting the 5V 3pin connector from the hub to your Motherboard.

Six Infinity 120mm ARGB Dual-Ring Black Fans - This version of the CiT Mirage comes with 6 x Infinity 120mm ARGB Dual-Ring Black Fans. The Dual-Ring and the circular-shaped, multi-layer Infinity Mirror Design, the Infinity fans add a mesmerising LED lighting display to the Mirage.

Fan Controller Included - A 6-port hub is included inside the Mirage which allows you to add up to 6 case fans and is powered directly from your power supply via SATA. You can access it using the LED button and can be connected to your Motherboard using a single cable - you can setup without any additional cables.

Motherboard Software - The ARGB lighting effects can be synced through the Motherboard which supports ARGB function, 5V 3-Pin Addressable RGB header, including ASUS AURA, MSI Mystic Light, Gigabyte Fusion 2.0 & ASRock. Customise the look with endless possibilities with 16.7 million static modes and 12 pre-set lighting effects.

Tempered Glass Panel - The solid tempered glass side panel with 30% tinted glass adds a premium finish and still offers an excellent view of the interior, components and ARGB.

Available In Two Colours - The CiT Mirage is available in two colours, black or white. The model of the Mirage is the black, the perfect backdrop for high-end hardware and RGB lighting.

PSU Shroud - To keep the interior looking neat and tidy the Mirage has a dedicated PSU Shroud that is made with solid steel panelling that perfectly covers the cables, showcases the PSU specs and contains a hard drive mount. The PSU shroud can mount a single 3.5 hard drive only. There are another three hard drive slots available so in total there is 3 x 2.5 and 2 x 3.5 that can be mounted to this chassis.

ATX Housing - Standing at 450mm high, 203mm wide and 346mm deep the Mirage is compatible with a wide range of components, with 300mm of clearance for GPUs and it can facilitate CPU coolers up to 165mm tall. There are seven expansion slots on the rear panel for PCIe devices.

I/O Panel - Providing you with a varied connectivity support, the Mirage has a fully equipped I/O panel featuring one USB 3.0, two USB 2.0 and HD Audio, as well as a LED button (Reset Switch). CSCITMIRAGE

Further details for this product, CSCITMIRAGE, can be found at the manufacturer website. Please note, these web addresse(s) are supplied by 3rd parties, Quzo UK is not responsible for the content.

Midi Tower, 7 x Full Expansion Slots, 1 x USB 3.0 2 x USB 2.0, Tempered Glass, SPCC, Black, 5.6kg

CiT CSCITMIRAGE. Form factor: Midi Tower, Type: PC, Product colour: Black. Power supply location: Bottom, Supported power supply form factors: ATX. Front fans installed: 3x 120 mm, Front fans diameters supported: 120 mm, Rear fans installed: 1x 120 mm. Supported HDD sizes: 3.5", SSD form factor: 2.5". Width: 203 mm, Depth: 346 mm, Height: 450 mm

CiT CSCITMIRAGE computer case Midi Tower Black CSCITMIRAGE Specifications

Product Type PC Cases Brand Cit Collection Model Cit CSCITMIRAGE Manufacturer Product Type Cit PC Cases Form Factor Midi Tower Product colour Black Supported motherboard form factors ATX, micro ATX, Mini-ITX Number of 3.5" bays 1 Number of 2.5" bays 4 Cable management Yes Number of internal 3.5" bays 2 Number of expansion slots 7 Full-Height expansion slots 7 Side window Yes Illumination colour Multi Illumination location Back, Front Tempered glass panel(s) Yes Illumination Yes On/off button Yes Maximum CPU cooler height 16.5 cm Maximum graphics card length 30 cm Maximum PSU length 19.5 cm Product colour Multicoloured SSD form factor 2.5" Supported HDD sizes 3.5" USB 2.0 ports quantity 2 Audio Input Yes USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity 1 Colour Black Power supply included No Power supply location Bottom Front fans installed 3x 120 mm Number of front fans supported (max) 3 Front fans diameters supported 120 mm Rear fans installed 1x 120 mm Number of rear fans supported (max) 1 Rear fans diameters supported 120 mm Top fans installed 2x 120 mm Number of top fans supported (max) 2 Top fans diameters supported 120 mm Number of bottom fans supported (max) 2 Bottom fans diameters supported 120 mm Front radiator sizes supported 120,240 mm Rear radiator sizes supported 120 mm Top radiator sizes supported 120,240 mm Type PC Width 203 mm Depth 346 mm Height 450 mm Weight 5.6 kg Net Weight 5.20Kg Material SPCC, Tempered glass Reset button Yes Case Type Midi Tower Case Case Type Mid Tower Supported power supply form factors ATX Gross weight 5.80Kg Expansion Slots 7 Features RGB Lighting Package height 432 mm Package width 255 mm Package depth 498 mm Package weight 6.4 kg Package length 50cm Package Type NA Package width 43cm Package height 25.5cm LED controller Yes Front USB 2.0 Port(s) 2 Front Headphone Jack(s) 1 Front Microphone Jack(s) 1 Motherboard Support Mini ITX / Micro ATX / ATX Product Height 450mm Drive Bays Internal 3.5" 2 Front USB 3.0 Port(s) 1 Side Panel 4mm Tempered Glass Drive Bays Internal 2.5" 2 Material Front Panel 4mm Tempered Glass PSU Support Standard ATX Model Number CSCITMIRAGE Material Chassis SPCC Drive Bay(s) Notes: 1 x 2.5" and 1 x 3.5" Shared Pre-installed Fan(s) Front 3 x 120mm (RGB Rainbow) Pre-installed Fan(s) Rear 1 x 120mm (RGB Rainbow) Pre-installed Fan(s) Top 2 x 120mm (RGB Rainbow) Radiator Support Front: 240mmTop: 240mm Fan Support Front: 3 x 120mmTop: 2 x 120mmRear: 1 x 120mmBottom: 2 x 120mm Clearances GPU Max Length: 300mmCPU Cooler Maximum Height: 160mm Product Width 195mm Product Length 341mm Package Contents CaseAccessories Bag Keywords CaseTowerATXM-ATXMicro ATXRGB MPN CSCITMIRAGE Most Suitable For Gaming

CiT CSCITMIRAGE computer case Midi Tower Black CSCITMIRAGE Reviews

There are no reviews for this product.