General Information for Antec PC Cases
Antec Performance 1 FT, Full Tower, PC, White, ATX, EATX, ITX, micro ATX, Glass, Plastic, Steel, Gaming
Performance 1 FT
Full Tower E-ATX Highly Compatible Gaming Case
- CPU/GPU Temperature Display
- Antec iUnity Software for instant data on PC specs
- USB Type-C (10Gbps)
- 4mm Tempered Glass Side Panels
- 4x 30mm Thick Pre-Installed Storm T3 PWM Fans
- Airflow-enhancing Mesh Front Panel
- Supports RTX 40 Series Graphics Cards
- Thoughtful Design Features
- Modular Drive Trays
CPU/GPU Temperature Display
By pressing the switch button on the I/O panel, users can glance at the temperature of the CPU and GPU on the temperature display.
The temperature display can be switched from CPU temperature to GPU temperature or turned off via the switch button.
Note: The Antec iUnity software must be installed.
Antec iUnity
The Antec iUnity Software provides instant data on PC specs, loads, and usage.
I/O Panel
- Including the mainstream USB Type-C (10Gbps) port for high-speed transfer
- Included dust plugs for dust prevention.
- Mic/Audio 2-in-1 port
4mm Tempered Glass Side Panels
Both side panels adopt tempered glass for better PC showcase visual effects.
Cable Management On Point
2 cable covers are included for beautifying the cable management area.
There are ten sets of velcro straps for easy cable management:
- Three sets of velcro straps for fan & I/O cable routing
- Five velcro straps for hardware and power supply cables
- Two velcro straps at the rear for rear I/O cable routing.
30mm Thick Pre-Installed Storm T3 PWM Fans
- 3 x Storm T3 140mm PWM Fans at the Front
- 1 x Storm T3 120mm PWM Fan at the Rear
The Storm T3 Fan of 30mm thickness comes with thicker and longer fan blades, efficiently increasing the air intake.
The PWM function easily reaches the balance between cooling and silence.
Exquisite Steel Mesh
The mesh front panel adopts the 1.2mm vent holes and the magnetic & clip-on design with easy access.
Best Airflow Path For GPU Cooling
Airflow-enhancing mesh front panel provides massive air.
Ample mesh at the bottom with fans (optional) on the meshed PSU shroud provides the best performance for the GPU cooling
Dust Filters
- Top: Magnetic dust filter
- Front: Magnetic & clip-on dust filter
- Bottom: Full-sized pull-out dust filter.
Supports RTX 40 Series Graphics Cards
Full-tower PC case in 230mm width supports the up-to-date 40 Series GPUs and high-end PC components.
Thoughtful Design
- Stud for Fixing - The stud for fixing design provides a more convenient PC-DIY experience.
- Back-Mounted PSU Bracket - For easy installation.
- Drop-Proof Bolt - The drop-proof hook design avoids side panel damage.
- Rubber Grommets - 4 included rubber grommets for cable routing.
- 8 x Fully Open PCIe Slots - Bridgeless design supports vertical GPU installation.
- Rear Velcro Straps - For the rear I/O cable routing.
Best Cooling Design
- Support a 420mm radiator at the front. (When installing a 420mm radiator at the front, the radiator at the top most be less than 360mm)
- Supports 360mm radiators at the front and top simultaneously
- Up to 10 fans simultaneously
Modular Drive Trays
Supports up to 5 drives: 2 removable drive trays for 3.5" HDD/2.5" SSD & 3 drive trays for 2.5" SSD
Case Compatibility - Extensive Interior
- Motherboard support: E-ATX(up to 285 mm), A TX, Micro-ATX, ITX
- CPU cooler max height: 175 mm
- GPU max length: 400 mm
- Power Supply max length: 245 mm (with HDD) / 440 mm (without HDD)
Performance 1 FT
Further details for this product, Performance 1 FT, can be found at the manufacturer website. Please note, these web addresse(s) are supplied by 3rd parties, Quzo UK is not responsible for the content.
Full Tower, ATX, USB 3.0 x 2, USB 3.0 Type-C, 522 x 230 x 522 mm, 12.55 Kgs
Antec Performance 1 FT. Form factor: Full Tower, Type: PC, Product colour: White. Power supply location: Bottom. Front fans installed: 3x 140 mm, Front fans diameters supported: 120,140 mm, Rear fans installed: 1x 120 mm. Supported HDD sizes: 2.5,3.5". Width: 230 mm, Depth: 522 mm, Height: 522 mm
Warranty information: 2 Years
Initial Release Date: 04/09/2023
Read more »
Antec Performance 1 FT Full Tower White 0-761345-10091-5 Specifications
Product Type
PC Cases
Brand
Antec
Collection Model Antec Performance 1 FT
Manufacturer Product Type
Antec PC Cases
Form Factor
Full Tower
Supported motherboard form factors
ATX, EATX, ITX, micro ATX
Number of 3.5" bays 2
Number of 5.25" bays 0
Number of 2.5" bays 3
Cable management Yes
Number of expansion slots 8
Side window Yes
Product colour
White
Tempered glass panel(s) Yes
Anti-dust filter Yes
On/off button Yes
Maximum CPU cooler height 17.5 cm
Maximum graphics card length 40 cm
Maximum PSU length 44 cm
Product colour Multicoloured
Product Family Performance 1 FT
Supported HDD sizes 2.5,3.5"
HDD/SSD combo cage Yes
USB 3.2 Gen 2 (3.1 Gen 2) Type-A ports quantity 0
USB 3.2 Gen 2 (3.1 Gen 2) Type-C ports quantity 1
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity 2
Combo headphone/mic port Yes
USB 2.0 ports quantity 0
Power supply included No
Power supply location Bottom
Front fans installed 3x 140 mm
Number of front fans supported (max) 3
Front fans diameters supported 120,140 mm
Rear fans installed 1x 120 mm
Number of rear fans supported (max) 1
Rear fans diameters supported 120 mm
Number of top fans supported (max) 3
Top fans diameters supported 120,140 mm
Liquid cooling capability Yes
Front radiator sizes supported 120,140,240,280,360,420 mm
Rear radiator sizes supported 120 mm
Top radiator sizes supported 120,140,240,280,360 mm
Type
PC
Depth 522 mm
Height 522 mm
Width 230 mm
Weight 12.6 kg
Material Glass, Plastic, Steel
Reset button Yes
Year 2023
Case Type
Full Tower Case
Features RGB Lighting
Package weight 14.8 kg
MPN 0-761345-10091-5
Most Suitable For Gaming