General Information for Antec PC Cases
Antec Performance 1 FT ARGB, Full Tower, PC, Black, ATX, EATX, ITX, micro ATX, Glass, Plastic, Steel, Amber, Blue, Green, Red
Performance 1 FT ARGB
Full Tower E-ATX Highly Compatible Gaming Case w/ 4x ARGB Fans
- CPU/GPU Temperature Display
- Antec iUnity Software for instant data on PC specs
- USB Type-C (10Gbps)
- 4mm Tempered Glass Side Panel
- 4x 140mm Tranquil ARGB PWM fans
- Airflow-enhancing Mesh Front Panel
- Supports RTX 40 Series Graphics Cards
- Thoughtful Design Features
- Modular Drive Trays
CPU/GPU Temperature Display
By pressing the switch button on the I/O panel, users can glance at the temperature of the CPU and GPU on the temperature display.
The temperature display can be switched from CPU temperature to GPU temperature or turned off via the switch button.
Attention: The Antec iUinity software must be installed.
Antec iUnity
The Antec iUnity Software provides instant data on PC specs, loads, and usage.
I/O Panel
- Including the mainstream USB Type-C (10Gbps) port for high-speed transfer
- Included dust plugs for dust prevention.
- Mic/Audio 2-in-1 port
4mm tempered glass & perforated solid steel
Left panel adopts tempered glass for better PC showcase visual effects.
Right solid panel is bottom-perforated to enhance heat dissipation and ventilation..
Cable Management On Point
Spacious cable management for efficient wire organization.
There are ten sets of velcro straps for easy cable management:
- Three sets of velcro straps for fan & I/O cable routing
- Five velcro straps for hardware and power supply cables
- Two velcro straps at the rear for rear I/O cable routing.
Pre-installed 4 x Tranquil Silent ARGB Fans
- 3 x 140mm Tranquil ARGB PWM fans in front
- 1 x 120mm Tranquil ARGB PWM fan in rear
Unique fan blade and frame design offers powerful airflow with low noise accomplished.
Exquisite Craftsmanship
Minimal clearance between fan frame and blades, achieving maximum operational efficiency.
Vibration-Absorbing & Anti-Noise Pads
Equipped with eight damping feet to prevent chassis and fan resonance, reducing noise.
Exquisite Steel Mesh
The mesh front panel adopts the 1.2mm vent holes and the magnetic & clip-on design with easy access.
Best Airflow Path For GPU Cooling
Airflow-enhancing mesh front panel provides massive air.
Ample mesh at the bottom and bottom-right side, and the availability of fans installed on the meshed PSU shroud together provide the best performance for the GPU cooling.
Dust Filters
- Top: Magnetic dust filter
- Front: Magnetic & clip-on dust filter
- Bottom: Full-sized pull-out dust filter
- Side: Magnetic dust filter
Supports RTX 40 Series Graphics Cards
Full-tower PC case in 230mm width supports the up-to-date 40 Series GPUs and high-end PC components.
Thoughtful Design
- Stud for Fixing - The stud for fixing design provides a more convenient PC-DIY experience.
- Back-Mounted PSU Bracket - For easy installation.
- Drop-Proof Bolt - The drop-proof hook design avoids side panel damage.
- Rubber Grommets - 4 included rubber grommets for cable routing.
- 8 x Fully Open PCIe Slots - Bridgeless design supports vertical GPU installation.
- Rear Velcro Straps - For the rear I/O cable routing.
Best Cooling Design
- Support a 420mm radiator at the front. (When installing a 420mm radiator at the front, the radiator at the top most be less than 360mm)
- Supports 360mm radiators at the front and top simultaneously
- Up to 10 fans simultaneously
Modular Drive Trays
Supports up to 5 drives: 2 removable drive trays for 3.5" HDD/2.5" SSD & 3 drive trays for 2.5" SSD
Performance 1 FT ARGB
Further details for this product, Performance 1 FT ARGB, can be found at the manufacturer website. Please note, these web addresse(s) are supplied by 3rd parties, Quzo UK is not responsible for the content.
Full Tower, E-ATX, ATX, Micro-ATX, ITX, Steel + Plastic + Glass, 522 x 230 x 522 mm (DWH)
Antec Performance 1 FT ARGB. Form factor: Full Tower, Type: PC, Product colour: Black. Front fans installed: 3x 140 mm, Front fans diameters supported: 120,140 mm, Rear fans installed: 1x 120 mm. Supported HDD sizes: 2.5,3.5". Width: 230 mm, Depth: 522 mm, Height: 522 mm. Package weight: 15.3 kg
Warranty information: 2 years
Initial Release Date: 10/04/2023
Read more »
Antec Performance 1 FT ARGB Full Tower Black 0-761345-10089-2 Specifications
Product Type
PC Cases
Brand
Antec
Collection Model Antec 0-761345-10089-2
Collection Model Antec Performance 1 FT ARGB
Manufacturer Product Type
Antec PC Cases
Form Factor
Full Tower
Product colour
Black
Supported motherboard form factors
ATX, EATX, ITX, micro ATX
Number of 3.5" bays 2
Number of 2.5" bays 3
Number of expansion slots 8
Illumination colour Amber, Blue, Green, Red
Tempered glass panel(s) Yes
Illumination Yes
Anti-dust filter Yes
RGB control button Yes
On/off button Yes
Maximum CPU cooler height 17.5 cm
Maximum graphics card length 40 cm
Maximum PSU length 44 cm
Product colour Multicoloured
Product Family Performance 1 FT ARGB
Supported HDD sizes 2.5,3.5"
USB 2.0 ports quantity 2
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity 1
Combo headphone/mic port Yes
Power supply included Yes
Front fans installed 3x 140 mm
Number of front fans supported (max) 3
Front fans diameters supported 120,140 mm
Rear fans installed 1x 120 mm
Number of rear fans supported (max) 1
Rear fans diameters supported 120 mm
Number of top fans supported (max) 3
Top fans diameters supported 120,140 mm
Front radiator sizes supported 120,140,240,280,360,420 mm
Rear radiator sizes supported 120,140,240,280,360 mm
Top radiator sizes supported 120 mm
Type
PC
Depth 522 mm
Height 522 mm
Width 230 mm
Weight 13 kg
Material Glass, Plastic, Steel
Reset button Yes
Year 2023
Case Type
Full Tower Case
Power supply shroud Yes
Warranty period 2 year(s)
Features RGB Lighting
Package weight 15.3 kg
MPN 0-761345-10089-2
Most Suitable For Gaming