General Information for Yamaha Amplifiers
Yamaha PX10, 1200 W, D, 0.1%, 101 dB, 1200 W, 1000 W
PX10
Intelligent Processing. Serious Power
Since the 1976 release of the P2200 our first professional power amplifier Yamaha has strived to achieve the highest possible levels of sound quality power output and reliability in sound reinforcement studio and installed applications. The new PX series power amplifiers continue this tradition of excellence utilizing Yamaha’s renowned digital signal processing technology and unparalleled professional audio expertise to achieve a light durable design capable of delivering maximum output power to the speakers while simultaneously protecting them with optimized processing. Driven by a newly-developed Class-D amplifier the four new models that make up the PX series are suitable for a broad range of sound reinforcement and installation environments.
Powerful Efficient Design
PX series models are driven by a newly developed Class-D amplifier engine that concentrates all the necessary functions into a single custom LSI chip and uses PLL technology to control transfer characteristics in real time achieving impressive sound quality and power. This new single-chip architecture offers higher output and improved performance in a more lightweight yet reliable design. A combination of cutting-edge technology and an exhaustive component selection process make PX Series amplifiers supremely efficient amplifiers with low noise reliable protection features and above all outstanding sound quality.
Sophisticated Signal Processing
PX series models come with flexible onboard PEQ crossover filters delay and limiter functions as standard allowing quick and easy system setup via the LCD display without the need for any additional outboard gear. All models also feature Yamaha’s intelligent D-CONTOUR multi-band dynamic processing allowing users to achieve consistent clarity and high-quality sound at any output level by tailoring the frequency response of each connected speaker for either front-of-house or monitor configurations.
Easy Intuitive Setup
To accommodate users with varying levels of sound reinforcement experience the PX series offers both Basic and Advanced setup modes. Basic mode allows even inexperienced users to easily configure a system that meets their needs while Advanced mode offers experienced users more precise control over every aspect of their sound. All models feature eight programmable presets for instant recall and reduced setup time that can be saved to a USB thumb drive and shared with other PX amplifiers.
Flexible Connectivity Durable Construction
Equipped with both XLR and TRS inputs and binding post SpeakON and phone outputs PX Series amplifiers offer the flexibility needed for a variety of setups and environments and the durability to stand up to extended road-use thanks to the sturdy chassis and carrying handle design.
Versatile Lineup
With a lineup comprising four new models – 1200 W x 2 PX10 1050 W x 2 PX8 800 W x 2 PX5 and 500 W x 2 PX3* – the PX series offers a versatile range of different power output capabilities suitable for a wide variety of sound reinforcement applications. The PX3 and PX5 also come equipped with a Power Boost Mode that combines the power output from two channels into one achieving significantly higher single-channel power levels to drive high power handling speakers when needed (note that the number of channels available is halved in this case). *Power output figures rated at 4 Ω.
The Config Wizard allows users to save even more time during system
setup by assigning optimized speaker settings that match your system configuration– simply select the appropriate filter and crossover for each speaker and Config Wizard will do the rest. Config Wizard also features presets* specifically tuned for each model in Yamaha’s extensive lineup of passive speakers including the popular CBR Club Installation and VXS/VXC series and an advanced mode that allows more detailed configuration of parameters such as input routing input sensitivity amp gain and speaker impedance.
Utilities for Safe and Secure Operation
PX Series amplifiers make it fast and easy to configure panel settings monitor amplifier status and transfer data via USB and also feature a panel locking function to keep your settings safe. Users can even export information such as internal device and log data to USB for rapid troubleshooting should difficulties arise.
| Features |
|---|
| Single/ Pair | Single |
| Weight | 7.4 Kg |
| Dimensions W x D x H | 480 x 88 x 388 mm |
PX10
Further details for this product, PX10, can be found at the manufacturer website. Please note, these web addresse(s) are supplied by 3rd parties, Quzo UK is not responsible for the content.
2x 1000W 8Ohm, 48kHz, USB, XLR, Neutrik speakON NL4, 480x88x388 mm
Yamaha PX10. Peak power per channel: 1200 W, Amplifier class: D, Total Harmonic Distortion (THD): 0.1%. Speakers connectivity type: Binding post/NL4. AC input frequency: 50 - 60 Hz, Power consumption (typical): 310 W. Width: 480 mm, Depth: 388 mm, Height: 88 mm
Initial Release Date: 19/04/2021
Read more »
Yamaha PX10 audio amplifier Home Black PX10 Specifications
Product Type
Amplifiers
Brand
Yamaha Commercial
Collection Model Yamaha PX10
Manufacturer Product Type
Yamaha Amplifiers
Product colour
Black
Cooling type Active
LED indicators Yes
Product Family PX10
Peak power per channel 1200 W
RMS power output per channel (4 Ohm) 1200 W
RMS power output per channel (8 Ohm) 1000 W
Dynamic power per channel (2 Ohm) 700 W
Crosstalk (1kHz) -60 dB
Input impedance 20000
Frequency Range 20 - 20000 Hz
Total Harmonic Distortion (THD) 0.1%
Purpose Home
USB 2.0 ports quantity 1
Speakers connectivity type Binding post/NL4
XLR in Yes
AC (power) in Yes
Power consumption (typical) 310 W
AC input frequency 50 - 60 Hz
Width 480 mm
Weight 7.4 kg
Height 88 mm
Depth 388 mm
Signal-to-Noise Ratio (SNR) 101 dB
Amplifier class D
Year 2021
Operating temperature (T-T) 0 - 40 C
Storage temperature (T-T) -20 - 60 C
User guide Yes
Manual Yes
Cables included AC
MPN PX10
Yamaha PX10 audio amplifier Home Black PX10 Reviews
There are no reviews for this product.