Allied Telesis AT-IMC2000T/SP-980, 1000 Mbit/s, 10Base-T, 100Base-T, 1000Base-T, 100Base-X, 1000Base-X, Fast Ethernet, Gigabit Ethernet, 10,100,1000 Mbit/s, 14880 pps
AT-IMC2000T/SP-980
10/100/1000T to 100Mbps/1000Mbps SFP industrial temperature media converter. These converters feature Smart MissingLink (SML) and support up to 10K jumbo frames. The IMC2000T/SP-980 can be mounted on a DIN-rail or used as a desktop/standalone device and is fanless for silent operation.Powering remote devicesAllied Telesis IMC200/2000 Series Industrial Media Converters (IMCs) are ideal for powering remote devices, such as IP phones, video cameras and wireless Access Points (APs), which are more than 100m from a Power over Ethernet (PoE) switch. Each IMC can provide up to 70W of PoE.The 2000T/SP and the 2000TP/SP each feature a 10/100/1000T twisted-pair port, and an SFP port which supports and auto detects 100X and 1000X optics. No switch configuration is needed. Allied Telesis offers a wide variety of SFPs featuring multimode, single mode and BiDi optics.Models with a fixed fiber-optic port are available with SC or LC connectors. With these, you can achieve distances up to 2 km (100Mps) or 550 m (1000Mps). With the SFP model, you can achieve greater distances using a long-range SFP.In addition to transmitting data, the twisted-pair port also injects power down the cable, allowing a remote PoE powered device to operate without any additional power source. All PoE+ devices (IEEE802.3at compliant) are supported. All PoE+ devices support 802.3at, PoE+, LTPoE++ and 4-pair. The PC200x PoE+ Series can deliver up to 70W of power to the remote device.Remote Power CycleThe IMC200/2000 Series supports the Remote Power Cycle feature. This allows a remote administrator to log in to the host switch device and disable the switch port to which the IMC is attached, causing the PoE+ device to lose power. This allows administrators to reset remote devices without physically going to the location.Jumbo frame supportMany backbone switch products support the industry-standard IEEE 802.1Q specification for Virtual LANs (VLANs) which sends extra-long data packets on the network. The IMC200/2000 Series are fully compatible with these long packets, enabling them to be used in modern networks.Smart MissingLink (SML)The SML feature monitors network connections and provides a notification when a link fails, allowing administrators to quickly identify the source and location of failed links, and thus minimize downtime.- Converts speed as well as media type- Supports 802.3at, PoE+, 30W and LTPoE++, 4-pair up to 70W- Supplies up to 70W of PoE power- Supports 100 and 1000Mbps fiber SFP modules (IMC2000/SP)- Auto MDI/MDI-X- Smart Missing Link (SML)- Supports up to 10K jumbo frames- Supports multi-mode fiber- 4K MAC address table- Store-and-forward switching mode- Transparent to IEEE 802.1Q packets- Standalone or DIN rail mount- Fanless for silent operationTAA, 10/100/1000T to 100X/1000X SFP Industrial Temp Gigabit Media Converter
Allied Telesis AT-IMC2000T/SP-980. Maximum data transfer rate: 1000 Mbit/s, Converter input interface: 10Base-T, 100Base-T, 1000Base-T, Converter output interface: 100Base-X, 1000Base-X. Fiber optic connector: SFP, Connectivity technology: Wired. Wavelength: 850 nm, Tx power (min): -9.5 dBmW, Tx power (max): -4 dBmW. Product colour: Grey, International Protection (IP) code: IP30, Safety: UL 62368-1, EN 62368-1, UL 60950-1 (UL mark), CAN/CSA C22.2 No. 60950-1 (cUL mark), EN 60950-1.... Input volt
2 years
15/01/2019