D-Link DGS-1008P Unmanaged L2 Gigabit Ethernet (10/100/1000) Power over Ethernet (PoE) Black DGS-1008P/B

General Information for D-Link Network Switches

D-Link DGS-1008P, Unmanaged, L2, Gigabit Ethernet (10/100/1000), Full duplex, Power over Ethernet (PoE), Rack mounting

DGS-1008P

- Plug and Play operation
- 4 PoE ports
- Gigabit speed
- Non-blocking architecture: simultaneous full speed on all ports
- Fanless, silent operation to fit in any environment
- Quality of Service (QoS) queues for traffic prioritisation
- Cable diagnostics function to help troubleshoot wiring problems
- Safety function to prevent PoE overloads, protects both the switch and the connected PoE devices
- Green Ethernet technology, saves energy and increases the products lifespan

The DGS-1008P PoE Gigabit Desktop switch provides a cost-effective way for SOHO and SMB to benefit from the Power over Ethernet (PoE) technology by allowing users to power up devices such as wireless Access Points, network cameras or IP phones directly from the network cables. The DGS-1008P is equipped with Gigabit ports for faster speeds, and integrates D-Links Green Ethernet technology to save power when the switch is not in use. Its fanless design makes it completely silent so it is ideal for offices, libraries or meeting rooms.

Plug and Play PoE (Power over Ethernet)
The first four ports of the DGS-1008P support the IEEE 802.3af PoE standard. Each of these four ports can supply up to 15.4 Watts, making it a very convenient solution for applications that are far away from power outlets, or when it is necessary to minimise the clutter of extra power supplies. The switch will automatically detect the power that a connected PoE device requires so no configuration is needed. A failsafe mechanism will cut off the power in case of an unexpected PoE overload, protecting both the switch and the connected device.

Cable diagnostics function
Every time the DGS-1008P is powered up, it runs a micro diagnostics routine to check the integrity of the connected Ethernet cables. If a failure is detected, the switch will flag it by means of its front panel LEDs, making it easy for the user to troubleshoot wiring problems.

QoS (Quality of Service)
Despite being an unmanaged, Plug and Play switch, the DGS-1008P is able to classify network traffic by assessing the existing 802.1p and DSCP fields in the Ethernet frames and IP packets respectively, and forward them out of its ports depending on their priority. This allows for a smooth integration of video, voice and data traffic without delays or loss of quality.

Power-saving technology
The DGS-1008P is part of D-Link Green, D-Links eco-friendly technology, providing energy savings, reduced power consumption, and a longer product lifespan without sacrificing operational performance or functionality. This switch implements the Green Ethernet technology, which can save a substantial amount of energy by detecting the connected cable lengths, adjusting the power accordingly; and the port status, putting them in lo -power, stand-by mode when no network traffic is detected. Thanks to these power reductions, we have been able to remove the fans in the DGS-1008Ps design, making it completely silent and dramatically increasing its lifespan. DGS-1008P

Further details for this product, DGS-1008P, can be found at the manufacturer website. Please note, these web addresse(s) are supplied by 3rd parties, Quzo UK is not responsible for the content.

8-port Gigabit PoE Unmanaged Switch - 16 Gbps, 4 PoE ports, 192 KB RAM

D-Link DGS-1008P. Switch type: Unmanaged, Switch layer: L2. Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000), Basic switching RJ-45 Ethernet ports quantity: 8. Full duplex. MAC address table: 4000 entries, Switching capacity: 16 Gbit/s. Networking standards: IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3u, IEEE 802.3x. Power connector: DC-in jack. Power over Ethernet (PoE). Rack mounting

Initial Release Date: 27/03/2011

D-Link DGS-1008P Unmanaged L2 Gigabit Ethernet (10/100/1000) Power over Ethernet (PoE) Black DGS-1008P/B Specifications

Product Type Network Switches Brand D Collection Model D-Link DGS-1008P Manufacturer Product Type D-Link Network Switches Rack mounting Yes Product colour Black Stackable No LED indicators Link, PoE Product Family D-Link DGS Product Family DGS-1008P Product Family POE Switch Networking standards IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3u, IEEE 802.3x 10G support No Full duplex Yes Networking features Gigabit Ethernet Flow control support Yes Auto MDI/MDI-X Yes Basic switching RJ-45 Ethernet ports quantity 8 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000) Power Connector DC-in jack MAC address table 4000 entries Supported data transfer rates 10/100/1000 Mbps Switching capacity 16 Gbit/s Store-and-forward Yes Jumbo frames support Yes Power consumption (typical) 63.2 W Input Voltage 100 - 240 V Dimensions (WxDxH) 190 x 120 x 38 mm Year 2011 Switch type Unmanaged Switch layer L2 Quality of Service (QoS) support Yes Input frequency 50/60 Hz Output power 60 W Power LED Yes Operating temperature (T-T) 0 - 50 C Storage temperature (T-T) -40 - 70 C Certification RoHS, FCC, ICES-003, CE, C-Tick, VCCI, cUL, LVD Power over Ethernet (PoE) Yes MPN DGS-1008P/B

D-Link DGS-1008P Unmanaged L2 Gigabit Ethernet (10/100/1000) Power over Ethernet (PoE) Black Downloads

D-Link DGS-1008P Unmanaged L2 Gigabit Ethernet (10/100/1000) Power over Ethernet (PoE) Black Information Leaflet

D-Link DGS-1008P Unmanaged L2 Gigabit Ethernet (10/100/1000) Power over Ethernet (PoE) Black Instruction Manual

D-Link DGS-1008P Unmanaged L2 Gigabit Ethernet (10/100/1000) Power over Ethernet (PoE) Black Information Datasheet

D-Link DGS-1008P Unmanaged L2 Gigabit Ethernet (10/100/1000) Power over Ethernet (PoE) Black DGS-1008P/B Reviews

There are no reviews for this product.